Christmas Ribs

Here is a pic of one of my fourteen finished ribs. I used a trim bit in a router to cut the excess material off the gussets to make the edges match the top and bottom cap strips. Later I want to use a 45 deg bit so that I can bevel the edges away of the gussets so that they will not show when the wing is covered.

I thought that this was a pretty cool pic. The whole time I was making the ribs I was worried that they would not match very good. I was wrong. They look pretty good. I hope Dad is surprised.

2nd Fuse Sid Out of Jig

Finally the second fuse side is tacked and out of the jig. This is probably one of the coolest days in the build process to date. Lots of excitement. Dad and I passed the torch back and forth across the jig to get all the joints tacked.
ATTENTION
Those of you that are using MDF board for a table top, Don't spend much time between fuse sides. We laid the jig out about a year ago and built the first side probably 9 months ago. When we got ready to tack the 2ND side we laid the first side over the second and it did not mach up very well. There was probably 1/4" difference from firewall to tail post. Our fix was to put the first side back in the jig and redo the blocks. After we did this everything went pretty smooth and the second side came out like the first. I guess the MDF expanded due to moisture. Pics to come.

Christmas is coming

Well I have the 14 short ribs out of the jig. I am currently in the process of putting gussets on the front and back. I am getting ready to make the 4 full size ribs. I hope to get all this done by X-mas.
I have also been practicing my welding. Its getting a lot better. The joints don't look awesome but they do hold up to the destruction test. If I can't get Dad in the shop, I am going to have to take this bull by the horns. More fun for me I guess.

10 Ribs Done

Not really much to show lately. Just more of the same ribs over and over. I am getting better at making the joints. Soon I will be on to making the 4 full size ribs with full mahogany plywood skins.

First Rib

First good rib off the jig.

Obviously at this point I have only glued one side of the rib gussets.

At the front of this rib I put triangular gussets per the plans. After looking some things over I decided to replace these gussets with a single rectangular gusset that spans top to bottom just like the rest of the gussets that go up against the spar openings.

I went ahead and epoxied the back side of the gussets so that later on the varnishing will not be as hard. The solid blocking for the aileron spar attach and the nose block are made out of Douglas Fir. I oriented the grain on the rear block so that it will not split as easily when i screw the spar to it.

Gusset Stapler

I have been making ribs the last few days and have tried a few different ways of clamping the gussets while they dry. This method is not working for me so I am going to use the old fashion method, staples. Didn't have a gun so I bought this on for $10.99 at sears. I tried it on a piece of scrap gusset material and it worked great. I thought it would splinter the plywood. I was wrong. At the moment I can do about a rib a day. That's good enough for me.

Rib Diagonals

Today I cut all the diagonals for the ribs to length. I will later cut the mitres with my combo belt disk sander. I have a mitre saw but I like to use the disk sander better. It lets me fine tune each piece better. I made a first rib but after pulling it out of the jig and gluing the gussets on I have decided that this will be a practice rib. I think I can do better on the next 20. We shall see. This is not a big deal because I think I have enough capstrips.